Innokin Riptide kit with Crios Sub-Ohm Tank
Vaporesso Switcher with NRG Mini Tank
Aspire Cleito EXO
Technical parameters:
• Clearomizer capacity: 2 ml
• Coils resistance: 0.16Ω (60w - 100w)
• Thread: 510
• Dimensions:
- Diameter: 23.5 mm
- Height (with drip): 57 mm
• Top fill clearomizer
The kit contains:
• Aspire Nautilus 2 Clearomizer
• Coil 0.16Ω (pre instaled)
• Coil 0.16Ω (spare)
• Drip tip (spare)
• O-rings (spare)
Sub ohm device. Worth reading before buying:
This type of tank is intended for the user with grater knowledge and experience. Coils used are below 1.0 ohm so that higher Wattage could be used. Before you use please read manual.
For Sub ohm tanks we recommend that you do not use liquids with nicotine higher than 6mg / ml and only good quality liquids with 50/50 PG / VG or higher VG. Tanks of this type produce a lot more of vape, which results in a stronger hit to the throat (like higher nicotine in the basic device). Ask if you're not sure ... we don't bite ;-)
IMPORTANT! When using a new coil, let the device stand for 5 minutes, so the cotton can be saturated with juice before firing. Do not let the tank become completely empty. Refill the tank to avoid dry burning or damage to the coil.
Kanger T3D 2.0
The Kanger T3D is an upgrade to the popular Kanger T3S clearomizer. The T3D is a bottom dual coil clearomizer rather than a single coil clearomizer like the T3S. Dual coil clearomizers ensure a good kick of flavour and vapour from your e liquid, as heat is transferred faster and more efficiently to the coils. The T3D is also bottom fill device and is made up of four parts which are the tube, the base, the coil/head and the detachable drip tip (unlike the T3S which has a fixed mouth piece). The T3D has 510 drip tip so can be swapped with alternative 510 drip tips. The T3D has a big 2.0ml capacity and is compatible with eGo series batteries but cannot directly be used with 510 threaded devices. For use with 510 devices, please purchase 510 to eGo Adapter.
Aspire Nautilus X Tank
The Nautilus X is specifically designed to provide a more flavorful vape experience. The tank is a low profile 2ml capacity tank, with its airflow being located at the top to utilize the unique U-tech coil. The U-tech coils are rated at 1.5Ω and 1.8Ω . With the 1.5Ω coil recommended power output being at 14-20W and the 1.8Ω coil recommended power output being at 12-16W.
Eleaf GTL Pod Tank
The Eleaf GTL Pod Tank utilises the GTL coils available in 1.2ohm, 0.8ohm and 0.4ohm resistance. These coils are fitted through a push-fit connection making it easy to swap out with no mess.
A strong magnetic connection houses the GTL Pod Tank within the 510 base, which makes it compatible with a wide range of vape mods. The base of the tank features a dual sided airflow; with one side being fully adjustable and the other a restricted airflow making the GTL Pod tank suitable for any vaper.
New


Eleaf GZeno Tank
The GZeno tank utilises GZ atomizers, designed to offer great flavour for MTL vapers. These coils are easily removed through a push fit connection preventing messy coil changes. Along with this the bayonet fitting at the bottom of the tank makes it even quicker to replace the atomizer.
Filling the GZeno tank is easy. The twist top mechanism reveals large inlets to fill with vape liquid, plus a fully adjustable airflow to suit personal preference.
Innokin Zlide Tank
The Innokin Zlide Tank is a collaboration between Innokin and two very prominent personalities in the vaping world, Phil Busardo and Dimitris Agrafiotis. The Innokin Zlide tank is not designed as a replacement for the original Zenith, but rather to offer a more cost-effective solution, all while addressing some feedback from current Zenith users.
New

Black

Innokin Slipstream Tank
Aspire Nautilus 2S Vape Tank
Innokin iSub B Vape Tank
The Innokin iSub B vape tank is from the highly regarded iSub range of tanks. The iSub B is the newest tank from the range and it utilises the new PLEX3D iSub B coils that have a larger coil surface area allowing for increased flavour and vapour production. The iSub B tank is available in a selection of eye catching colours and has a 2ml capacity.
VooPoo PnP Pod Tank
The VooPoo PnP Pod Tank can flexibly switch between from being a pod to a vape tank. Compatible with the full range of VooPoo PnP coils as well as their RBA version, the PNP Tank has a magnetic base that sits perfectly in both the VooPoo Drag S and Drag X Kits. With the 510 base the PnP Pod tank is also compatible with most 510 threaded vape kits, simply remove the 510 base to switch between the two modes!
With dual airflow design and bottom filling this revolutionary tank will be the perfect accessory to your vaping hardware!
Innokin Zenith Pro Tank
The Zenith Pro Tank is the latest edition to the hugely popular Innokin Zenith line of probably the best MTL vape tanks currently being produced. With a 2ml e-liquid capacity, the Zenith Pro features dual bottom airflows with twist top filling, auto e-liquid shut off to avoid flooding and is compatible with the the entire Innokin Z-Coil line.
Aspire ET-S Clearomizer
Aspire ET-S clearomizer tank offers you the most flavourful sensation with the optimal vapour production for the best price.
Aspire ET-S tank uses a replaceable and popular bottom dual coil head (BDC) or vertical BVC coils.
The atomizer holds approximately 2ml (TPD compliant) of e-liquid and could be is easily disassembled and reassembled, making cleaning and refilling quick and simple.
-49%


OFRF nexMESH Sub Ohm Conical 2ml Mesh Tank
Horizon Tech Falcon 2 Tank
The Falcon 2 tank is here! HorizonTech have redesigned the impressive Falcon King tank to produce an even more flavour full cloud chasing sub ohm vape, the Falcon 2.
Available in 3 colours, the Falcon 2 Tank now features new plug and play coils with sector mesh coil, wood pulp and cotton. You can now refill the 2ml Falcon King with the push to refill top cap.
HorizonTech Falcon Mini Tank
The Falcon Mini is the update to the original Falcon tank featuring the new M2 coils and full metal construction. The M2 coil is made from a mixture of cotton and wood pulp rather than just cotton. This leads to longer lasting coils as well as a smoother vape and better flavour - this is not an ordinary sub-ohm tank! Other coils which are available for this tank are the Horizontech M1 Mesh Coils.